LED Neon Signs

LED neon signs also called faux neon signs, they are a new type of sign that uses modern LED and CNC-engraved acrylic to simulate traditional neon signs. In addition, the fabricated metal letters shell makes this sign have the same off-the-wall effect as the traditional neon sign, widely used for business, store, building, storefront, shop, outdoors & indoors.

About LED Neon Signs

Sample case

LED Neon Signs
  • LED neon signs require a power source so that the LED light source can provide good light. Although solar energy and wind energy are used by more and more users due to their green characteristics, when used as power sources for illuminated signs, these green energy sources need to be matched with energy storage batteries to ensure the stability of the current. Therefore, the stability and cost of this kind of power supply will all be worse than the mains power. Therefore, we recommend using mains power. Whether it is civilian AC or industrial AC, it will be more stable.
  • The vast majority of LEDs are driven by safe 12V DC power. Therefore, if the mains power is used as the power supply, the AC transformer is required to convert the AC power into the 12V DC power required for LED operation. Therefore, it is recommended that before purchasing, you first understand the voltage of the AC power at the place where the LED neon signs will be installed, so that we can provide you with a suitable AC transformer.
  • In order to reduce line loss, we recommend that the length of the wire from the signage to the AC transformer be controlled to 3 meters (about 118 inches), otherwise the LED may not fully emit light due to excessive current loss.
  • The AC transformer will generate heat when working, it is recommended that the AC transformer be placed in a place with good heat dissipation. If the AC transformer cannot dissipate heat smoothly, the service life of the transformer will be seriously affected.
  • The installation of LED neon signs usually requires drilling holes in the wall, so it is recommended that you confirm with the landlord what restrictions there are on drilling holes before purchasing.
  • Some cities, communities and landlords have certain restrictions on the brightness and color temperature of illuminated signs, so it is recommended that you understand these restrictions before purchasing.


  • Can be letters, numbers and logo.
  • Each individual part is separate.
  • Using fabricated metal 3D letters shell.
  • LEDs are installed in the letters shell as light source.
  • The CNC engraved solid acrylic front surface is illuminated.
  • Can be used indoors or outdoors.

Tech details

The Min. width of the strokes
The Min. height of the letters
Default thickness
Production time
In 15 working days by default
Flush mounting mostly
  • There is a kind of LED neon signs suitable only for indoor use. They are made of cast acrylic and must be equipped with an acrylic base plate. The production cost of this kind of LED neon signs is low, but because of the acrylic base plate, the transportation price will increase. If only a small quantity is ordered, the DHL doort door delivery by DDU terms cost may even exceed the production cost. If you need this kind of LED neon signs, please contact us.
  • Can be big letters.


One set of LED neon signs consist of the following components:

  • Acrylic front surface
  • Metal letters shell
  • LEDs
  • Cables
  • AC transformer

Acrylic front surface

CNC engraving
Default thickness
  • Usually clear acrylic or opal acrylic are used. Clear acrylic can better simulate the effect of neon glass tubes, but opal acrylic will have better luminous uniformity.
  • Due to the limitations of acrylic sheet, colored acrylics are rarely used. Unless customized acrylic panels are used, the minimum order quantity reduces the feasibility of this option.

Metal letters shell

304/316 stainless steel
Fabrication, laser cutting, laser welding
Default thickness
Surface finishes
  • Mirror polished stainless steel
  • Brushed stainless steel
  • Angel hair stainless steel
  • Gloss powder coat paints
  • Semi-gloss powder coat paints
  • Matte powder coat paints
  • Mirror polished gold plating
  • Brushed gold plating
  • Angel hair gold plating
  • Mirror polished rose gold plating
  • Brushed rose gold plating
  • Angel hair rose gold plating
  • Mirror polished titanium plating
  • Brushed titanium plating
  • Angel hair titanium plating
  • Mirror polished copper plating
  • Brushed copper plating
  • Angel hair copper plating
  • Mirror polished brass plating
  • Brushed brass plating
  • Angel hair brass plating
  • Mirror polished bronze plating
  • Brushed bronze plating
  • Angel hair bronze plating
  • Vintage copper
  • Vintage brass
  • Vintage bronze
  • Angel hair vintage brass
  • Angel hair vintage copper
  • Angel hair vintage bronze
  • Metallic paint
  • Wood Grain
  • 304 stainless steel fit for most surrounding, 316 stainless steel would be used for the signs in marine environments.
  • The Plating process, vintage process and wood grain process would be finished by our partner, which would cause about an additional 2 working days for the production.
  • The interior of the letter shell is usually white, giving the sign better illumination uniformity.


LED type
LED module, LED strip, PCB LED
More than 100,000 hours
Lighting color
  • White (about 6000k color temperature)
  • Warm white (about 4000k color temperature)
  • Red
  • Blue
  • Green
  • Yellow
  • Orange (RGB)
  • Pink (RGB)
  • Purple (RGB)
  • Addressable RGB/RGBW LEDs
  • Using the BlueView brand LED by default. Also have Cree brand LED.
  • For the outdoor signs we will use the water-proof LED lights.


Plenum copper wire by default
1.5mm2 (AWG 16) by default
Default Length
60cm (23.62")
  • Suggest using 2.5mm2 (AWG 14) for the trunk wire at least.
  • Trunk wire would not be provided by default.

AC transformer

Mean Well
waterproof or non-waterproof
110v~240v AC
12v DC
  • The waterproof AC transformers are using MeanWell brand LPV-60V-12 default, IP67, -30~70℃ wide operation range.
  • The Non-waterproof AC transformers are using LRS Series by default, 300VAC input surge, 5G vibration, 70℃ operations.


Most of the installation methods of LED neon signs are flush mount, off-wall mount or raceway mount, using stud bolts to install the signs on the wall.

  • Flush Mount: This installation method uses stud bolts and is installed separately on the building facade using the mounting holes. The wires used to power the lighting are fished out of the wire holes and mounted behind the wall so light source maintenance can be easily done from behind. Typically, each individual illuminated sign part has 2-3 stud bolts and 1 wire, so 3-4 holes need to be drilled in the wall for this. Obviously, this installation method will increase the installation workload, but since the wires and stud bolts are buried in the wall, the installed signs will be sleek and sophisticated.
  • Off-wall Mount: The only difference between this installation method and flush mount is that the sign is away from the backing wall, and spacers are used to ensure that each part is at the same distance from the wall.
  • Raceway Mount: In this installation method, the sign is first mounted on a slender metal mounting structure called a "raceway", usually made of aluminum or stainless steel, and then the raceway and signs are mounted on the wall as a whole. The interior of these mounting structures can be used to house electrical wiring and AC transformers. The advantage of this type of installation method is that it has fewer holes need to be drilled, which can be an important consideration for building owners or landlords, and it also makes it easier to install and renew the signage, while creating an off-wall visual for the sign, so the three-dimensionality will be better. However, due to the existence of the "raceway", the integrity of the sign and installation wall will be weakened.

To ensure your signage is installed correctly for optimal display and longevity, we recommend hiring professional installers. We will provide a 1:1 layout template to show the hole positions of stud bolts and wires, the installer will drill holes on the wall according to these hole positions. If it is an illuminated sign, the wiring work of the wires needs to be completed. We will provide installation instructions, wiring diagram and necessary installation accessories to help your installers complete the installation correctly and quickly. If you are unable to find the professional installers, please let us know and we will put you in touch with one of our partners to find good installers for you.


Recommended working temperature
-20℃ ~ +65℃ (-4℉ ~ +149℉)
Default IP rating for outdoor use
Three Years
  • stud bolts
  • nuts
  • washers
  • tube spacers
  • 1:1 layout template
  • wiring diagram
  • installation diagram
  • The recommended working temperature means that based on our experience, the sign can keep working within this temperature range for a long time without significantly reducing the service life. Generally speaking, illuminated LED signs can work in a wider temperature range, usually -30℃ ~ +70℃ (-22℉ ~ +158℉) but the harsher environment will shorten the service life of the signs.
  • Stud bolts are necessary for installation, used to fix the signs on the backing wall.
  • Nuts and washers are only fit for situations where people can work at the other side of the backing wall, then can use washers and nuts to secure the stud bolts to the wall.
  • If you need the LED neon signs off the backing wall, we will provide the stainless steel tube spacers with 20mm (0.8") length by default, electrical wiring and stud bolts can through the tube spacers, used to make all the individual part of the LED neon signs have the same distance between the backing wall.


  • In three years, if it is not the man-included damage, we will send you the damage part.
  • After 2 years, because of the half-life, the LED lighting would be weaker. In order to keep the effect of the signs, we suggest changing the LED lights when you feel the brightness could not reach your requirement.

Quick Form

If we don't receive your email reply, we will send you a SMS.

Our signs products are all customized, different details would cause different costs. The more detail you can provide, the more exact price we will provide.


Featured Items

Check Out Our LED Neon Signs Examples

Take a look through our additional examples and let us know what catches your eye.

More Cases

Custom LED Neon Signs

Custom LED neon signs are a striking fusion of contemporary LED technology and the nostalgic appeal of traditional neon signage. These signs utilize energy-efficient LEDs to replicate the iconic glow of neon lights, while CNC-engraved acrylic is expertly crafted to mimic the classic shape of neon glass tubes. This innovative approach allows for the iconic, vibrant luminescence of neon but with greater durability, energy efficiency, and versatility. The signs are often encased in a sturdy metal frame, which not only provides structural support but also adds to the overall aesthetic, blending modern design with a vintage feel. Custom LED neon signs are increasingly popular among businesses and individuals looking to combine the allure of traditional neon with the practical benefits of modern technology, creating signage that is both eye-catching and reliable.

The true appeal of custom LED neon signs lies in their extensive customization options. The flexibility of LED technology, combined with the precision of CNC engraving, allows for an array of creative designs, from intricate logos to stylized lettering. Customers can choose from a wide spectrum of colors and design intricacies, making each sign uniquely tailored to their specific branding or personal aesthetic. This level of customization makes LED neon signs ideal for a variety of applications, from enhancing business storefronts to creating unique interior decor pieces. The robust construction and the use of durable materials ensure these signs are suitable for both indoor and outdoor settings, enduring various environmental conditions. Whether it’s for commercial branding, event decoration, or personal expression, custom LED neon signs offer a versatile and striking signage solution that stands out for its blend of modern technology and classic neon artistry.

Get a Free Quote


Here you will know our workflow well

  1. 1: Contact with us

    Contact with us or fill our free quote form, we will arrange one of the sales following your quote and jobs.

  2. 2: Initial design

    If you do not have the design file as we needed, we will provide initial design service which includes the choosing fonts, dimensions confirmation, etc.

  3. 3: Free quotation

    Based on your request and the design file, we will give you the exact cost

  4. 4: Order confirmation

    Please print our quotation file, signature it and send us the scanned file

  5. 5: Deposit payment

    Please finish the deposit payment, then show us the bank slip etc. so that our accounting can confirm it

  6. 6: Drawing design

    We will detail the design file of your signs, then we will send the file to you to show you all the details

  7. 7: Begin production

    When we get the confirmation of the detail design file, we will begin the production

  8. 8: Lighting test

    Your signage would be a 24 hours keep lighting test when we finish the production, so that most issue could be fix

  9. 9: Final products

    We will take photos for your signage to show you the final products effect

  10. 10: Balance payment

    When you confirm the products, please send us the balance payment, then show us the bank slip etc. so that our accounting can confirm it

  11. 11: Shipping

    We will call the delivery company to pick up your signage products and give you the waybill number so that you can track it

  12. 12: After sale

    We provide three years free replacement to non-human damaged signs

Outdoor LED Neon Signs

Outdoor LED neon signs represent a contemporary take on the classic neon lighting, blending the nostalgic charm of traditional neon with the efficiency and versatility of modern LED technology. These signs mimic the distinctive glow and appearance of classic neon through the use of CNC-engraved acrylic, which replicates the look of neon glass tubes. The incorporation of LEDs not only provides a bright and vivid illumination reminiscent of old-school neon but also offers the advantages of energy efficiency, longer lifespan, and lower maintenance costs. The LED neon signs are encased in a robust metal shell, enhancing their durability and making them suitable for various outdoor settings. This fusion of the retro aesthetic with modern technology makes LED neon signs a popular choice for businesses seeking to add a unique and eye-catching element to their exteriors, combining the allure of neon with the practical benefits of LEDs.

One of the standout features of outdoor LED neon signs is their high degree of customization. Businesses can tailor these signs to their specific branding needs, choosing from a wide range of colors, designs, and sizes. The CNC engraving on acrylic allows for intricate and detailed designs, offering a level of customization that traditional neon could not easily achieve. This makes LED neon signs exceptionally versatile and suitable for a variety of business types, from restaurants and bars to retail stores and entertainment venues. Additionally, the durability of the metal casing and the resilience of the acrylic and LED components make these signs ideal for outdoor use, capable of withstanding the elements while maintaining their vibrant appearance. Whether it’s for branding, decorative purposes, or to create a certain ambiance, outdoor LED neon signs provide an effective and durable solution, marrying the classic neon look with modern functionality.

Get a Free Quote

Why choose us?

We do customized fascia signs professional

  • Experience

    With over 20 years of successful experience and knowledge in producing signs, we do know how to produce signs well for the world.

  • Price

    Orders directly from manufacturers to reduce intermediate expenditure. Buy high-quality custom signs with a more reasonable price.

  • Quality

    We provide you with high quality signs produced by our experienced technicians using advanced machines and high quality raw materials.

  • Lead Time

    Depending on the type and quantity of ordered signage products, we generally need about 15 business days to complete the signs production.

  • Accessories

    Provided with 1:1 layout template, stud bolts, nuts, installation diagram and other installation accessories per the needs of the customers.

  • Warranty

    Provided free three years non-human damage limited warranty, and also provides 5 years limited warranty policy with enrollment fees.

HiSun Advertising Co., Ltd

Address: Floor 7th, Qiang Sheng Mansion, No.145 of Pujian Road, Pudong District, Shanghai, China

Zip: 200127

Office Hour: 9:00 – 18:00 Beijing Time, Mon-Fri


About Us

We are a professional manufacturer and comprehensive signage company in China, committed to providing customers with high-quality signage products since 2004. With more than 13 years of international business experience and understanding of international brand quality certification systems, we have certificates with CE, UL, ISO: 9001, ISO: 14001 and ISO: 45001, to ensure the safety and reliability of our marked products. Through professional operation and rapid development, we already have many customers from all over the world.

Delivery partner

© www.FasciaSigns.com All Rights Reserved.